Description
Rapid ambient curing mercaptan curing agents for epoxy systems.
Applications
- Consumer, industrial, automotive and electrical adhesives
- DIY hobby and crafts adhesives
- Concrete grout and repair compounds
Features & Benefits
- Convenient 1:1 mix ratio with epoxy resin with adjustable gel times
- Excellent bond to metal, plastic, wood, and concrete
- Rapid build of hardness and physical properties
- Excellent for low temperature cure applications
ReOxy® Mercaptan Products
| ReOxy® | Type | Description | Gel Time | Similar Products | |
|---|---|---|---|---|---|
| CR 800 | Base Mercaptan | Uncatalyzed | Uncatalyzed | GABEPRO® GPM-800 GABEPRO® GPM-8003 | CAPCURE® 3-800 POLYTHIOL QE-340M |
| CR 888 | Modified Mercaptan | 5-minute cure | 5-minutes | GABEPRO® GPM-888 | CAPCURE® 3830-81 |
| CR 895 | Specialty Mercaptan | 1-minute cure | 40 seconds | GABEPRO® GPM-895FC | CAPCURE® 40SEC HV |
| CR 890 | Specialty Mercaptan | 2-minute cure | 90 seconds | GABEPRO® GPM-890CB | |
| CR 891 | Specialty Mercaptan | 5-minute cure | 5-minutes | GABEPRO® GPM-891 | CAPCURE® 3850-101 |
| CR 810 | Specialty Mercaptan | 10-minute cure | 10-minutes | ||
| CR 815 | Specialty Mercaptan | 15-minute cure | 15-minutes | ||
| CR 820 | Specialty Mercaptan | 20-minute cure | 20-minutes | ||
| CR 830 | Specialty Mercaptan | 30-minute cure | 30-minutes | GABEPRO® GPM-830CB | CAPCURE® 3830CB |
| AR 154 | Accelerator | Tertiary amine accelerator | GABEPRO® GPA-30 | VERSAMID® EH-30 | |
| AR 150 | Accelerator | Tertiary amine accelerator | VERSAMID® EH-50 |
ReOxy® is a registered trademark of Royce, Inc.
Gabepro®, Capcure®, Versamid® are registered trademarks of Huntsman Corporation.
Application Examples
Storage and Handling: ReOxy should be stored in its original packaging under dry conditions to protect the material from humidity and excessive heat. Under these conditions, it will have a shelf life of at least 2 years. Please refer to the SDS for safety and handling instructions.
Disclaimer: The properties listed above are typical values and should not be taken as products or sales specifications. All recommendations for use of products, whether given in writing, verbally, or to be implied from the results of tests carried out are based on the current state of knowledge. Although the information contained in this sheet is accurate to the best of our knowledge, no liability can be accepted in respect of such information and no warranty or conditions are intended in respect of the product described as the conditions of applications are beyond our control. We do not guarantee performance in the end application. The responsibility of testing the product lies with the user.
Beyond product quality, a commitment to superior service and innovation.